Safety Tips for Operating Any Type of Glass Handling Equipment

Make no mistake—handling glass can pose risks of injury, which entails that you safely carry the task. According to recent industry accident reports, glasswork-related injuries are common industrial facility accidents. This is because of the huge volumes of glass and the frequency of handling them. To avoid these injuries, it is best to know how to properly use glass handling equipment. Here are some measures to keep in mind:

  • Never operate such equipment without proper working attire.

Never handle glass without wearing a set of personal protective equipment (PPE). For this type of work, you should wear long sleeves, long pants, safety boots, apron or any kind of torso protection. You should also don gauntlet or any form of forearm protection, slip/cut resistant gloves, and protective eyeglasses.

  • Know how to use a specific glass handling equipment.

While there are many forms of this type of device, the most commonly used in the industrial sector would be the vacuum lifting system. It comprises a set of suction cups, a suction pump, a lifting frame or gantry, and a fabric tube attached with more suction pads and reinforced by a collapsible wire. To ensure safety while operating the entire equipment, you should be familiar with how each of its components functions. Study its manual and always follow the manufacturer’s instructions.

  • Give yourself proper training.

Hoisting equipment specialists suggest that only competent individuals should operate vacuum lifting equipment for glass. This means that before you get your hands on one, you should first get adequate training. A glass handling training programme should cover potential dangers that come with such work; factors that might cause equipment failure; equipment limitations; safety procedures; specific instructions by the manufacturer; and maintenance requirements and procedures. Check it out at Millsom

  • Always examine glass for any crack or chip.

Any damage to the glass surface makes it weak. And, weak glass can easily break, leading to injuries. So, before you lift and move any glass sheet, see to it that it is free of damage. For glass sheets applied with solvents, rinse and dry them completely before handling.

  • Know the limitations of each piece of equipment.

Depending on the machinery that you are using, it may clamp or handle glass with the use of supports, ring stands, glass suction cups, and so on. Generally, it needs a certain pressure on the glass. Make sure not to over-press or over-tighten, as this can lead to mechanical stress. Worse, it can break the glass which can cause injuries to anyone near the area.

  • Observe proper maintenance.

To ensure that the equipment stays in top operating condition, you should maintain. Besides ensuring safety, it also spots minor problems before they worsen and costs serious repairs.

If you are running a facility that deals with glass, you should observe the safety measures provide above. By doing so, you can decrease a great number of accidents and injuries amongst your staff.

Of course, you should also make sure you are using the best glass handling equipment on the market today. On that note, you can look at the collection at www.millsom.com.au.

Post Author: Evan Harris